Sort this list by
ID: MPPT001 MPPT Solar Regulator/Controller 10A 12V/24V

MPPT Solar controllers (Maximum Power Point Tracking) can intelligently regulate the working voltage of solar panels, letting the solar panels always work at Maximum Power Point of V-A curve. Compared with ordinary solar controller, this MPPT controller can increase the efficiency of PV modules by 10% to 30%. 

Features

  • MPPT function
  • Microprocessor controller pulse width modulation (PWM) charging
  • Temperature sensor battery charging compensation
  • Overload protection (automatic restoration)
  • Overcharge protection
  • Short circuit protection (automatic restoration)
  • Reverse discharge protection
  • Reverse polarity connection protection (automatic restoration)
  • Under voltage protection
  • Rated Voltage 12/24vdc
  • 2 x Load Outputs
  • RJ45 communication port for Optional Remote Meter

Specifications

  • Max Rated Charging Current: 10 amps
  • Max Rated Load current: 10 amps
  • Maximum Solar Input Power: 120 Watts @ 12V - 240 Watts @ 24 Volts
  • Self consumption: ≤ 16mA
  • System voltage: 12 DC / 24V DC Auto-set
  • Work temperature: -35° to +55°
  • Battery Types: Gel, Sealed, Flooded
  • Load Surge Protect: 35 Amp
  • Max Solar input Voltage: 100 Volts DC
  • Temperature compensation: -5mV/°C/cell
  • Control mode: 2 x Load Control Outputs

Dimensions: 160mm x 97mm x 47mm 

PRODUCT CODE: EMPPT1 

£84.99


 
 
Add to cart View cart
ID: MPPT002 MPPT Solar Regulator/Controller 20A 12V/24V

MPPT Solar controllers (Maximum Power Point Tracking) can intelligently regulate the working voltage of solar panels, letting the solar panels always work at Maximum Power Point of V-A curve. Compared with ordinary solar controller, this MPPT controller can increase the efficiency of PV modules by 10% to 30%. 

Specifications

  • Max PV Input Wattage: 260 Watts @ 12V - 520 Watts @ 24V
  • Max Input Voltage: 100Vdc
  • Efficiency: 95% - 99%
  • Self Consumption: ≤ 10mA
  • System Voltage: 12V/24V Auto-set
  • Working Temperature: -35° to +55°
  • Weight: 0.95kg
  • Battery Selection: Gel, Sealed, Flooded
  • Enclosure: IP30
  • Temperature Compensation: -30mV/°C/12V @ 25°C
  • Control Mode: MPPT Charging
  • Dimensions: 169mm x 118mm x 83mm

Features

  • MPPT function
  • Microprocessor controller pulse width modulation (PWM) charging
  • Dual Timer Function
  • Overload protection
  • Overcharge protection
  • Short circuit protection
  • Lightning protection
  • Reverse discharge protection
  • Reverse polarity connection protection
  • Under voltage protection
  • Rated Battery Voltage 12/24vdc

PRODUCT CODE: EMPPT2 

£179.99


 
 
Add to cart View cart
ID: MPPT003 MPPT Solar Regulator/Controller 30A 12V/24V

MPPT Solar controllers (also known as intelligent solar charge controllers) can intelligently regulate the working voltage of solar panels, letting the solar panels always work at Maximum Power Point of V-A curve. Compared with ordinary solar controller, this MPPT controller can increase the efficiency of PV modules by 10% to 30%. 

Features

  • MPPT function
  • Microprocessor controller pulse width modulation (PWM) charging
  • Temperature sensor battery charging compensation
  • Overload protection (automatic restoration)
  • Overcharge protection
  • Short circuit protection (automatic restoration)
  • Reverse discharge protection
  • Reverse polarity connection protection (automatic restoration)
  • Under voltage protection
  • Rated Voltage 12/24vdc
  • 1 x Load Outputs
  • RJ45 communication port for Optional Remote Meter

Specifications

  • Max Rated Charging Current: 30 amps
  • Max Rated Load current: 30 amps
  • Maximum Solar Input Power: 390 Watts @ 12V - 780 Watts @ 24 Volts
  • Self consumption: 10mA 24V
  • System voltage: 12 DC / 24V DC Auto-set
  • Work temperature: -35° to +55°
  • Battery Types: Gel, Sealed, Flooded
  • Max Solar input Voltage: 120 Volts DC
  • Temperature compensation: -5mV/°C/cell
  • Control mode: 1 x Load Control Outputs

Dimensions: 242mm x 169mm x 91mm 

PRODUCT CODE: EMPPT3 

£198.00


 
 
Add to cart View cart
ID: MPPT004 Remote Meter for MPPT Controllers

 

 

Remote meter for use with MPPT Solar Charge Controllers - 10A, 20A, 30A 12/24V 

Specifications

  • Working Current: Back-light and LED indicator off <15mA
  • Working Temp: -10°C - +40°C
  • Communication Port: RJ45 (8Pin)
  • Communication cable: 5 metres long
  • Size: 95mm x 95mm

LCD features

  • Battery 1 - Voltage Max and Min
  • PV - Voltage and AH
  • Remote Temperature

PRODUCT CODE: EMT005 

 

£29.95


 
 
Add to cart View cart
ID: MPPT005 Network MPPT Controller 45A 12/24/36/48V

MPPT Solar controllers can intelligently regulate the working voltage of solar panels, letting the solar panels always work at Maximum Power Point of V-A curve. Multiphase synchronous rectification technology gives peak conversion efficiency of up to 98%. Compared with ordinary solar controller, this MPPT controller can increase the efficiency of PV modules by 10% to 30%. 

Specifications

  • Max PV Input Watts: 600W @ 12V / 1200W @ 24V / 1800 @ 36V / 2400 @ 48V
  • Max Input Voltage: 150 Vdc
  • Battery Voltage Range: 8~72 Vdc
  • Grounding: Solar or Battery negative terminal
  • Self Consumption: 1.4 ~ 2.2W
  • System Voltage: 12V/24V/36V/48V Auto-set
  • Working Temperature: -25° to +55°
  • Weight: 4.4kg
  • Battery Selection: Gel, Sealed, Flooded
  • Enclosure: IP20
  • Terminals: 35mm²
  • Temperature Compensation: -5mV/°C/Cell @ 25°C (Adjustable)
  • Control Mode: MPPT Charging
  • Dimensions: 285mm x 203mm x 105mm

Features

  • MPPT function
  • LCD Display
  • 4 Stage battery Charging, Bulk/Boost/Float & Equalise (No Equalise on
  • Gel Battery Setting)
  • Adjustable Charging Parameters
  • Ethernet Port (RJ45)
  • Serial RS-232 Port (DB9)
  • CAN Bus Port (Communicate with over CAN BUS devices)
  • Remote Temperature Sensor Port
  • Remote Battery Sense Port

Protections

  • PV Short Circuit
  • PV Over Current
  • PV Over Voltage
  • PV Polarity Reversed
  • Battery Polarity Reversed
  • Over Heating Protection



PRODUCT CODE: EMPPT45

£422.00


 
 
Add to cart View cart
ID: MPPT006 Network MPPT Controller 60A 12/24/36/48V

MPPT Solar controllers can intelligently regulate the working voltage of solar panels, letting the solar panels always work at Maximum Power Point of V-A curve. Multiphase synchronous rectification technology gives peak conversion efficiency of up to 98%. Compared with ordinary solar controller, this MPPT controller can increase the efficiency of PV modules by 10% to 30%. 

Specifications

  • Max PV Input Watts: 800W @ 12V / 1600W @ 24V / 2400 @ 36V / 3200 @ 48V
  • Max Input Voltage: 150 Vdc
  • Battery Voltage Range: 8~72 Vdc
  • Grounding: Solar or Battery negative terminal
  • Self Consumption: 1.4 ~ 2.2W
  • System Voltage: 12V/24V/36V/48V Auto-set
  • Working Temperature: -25° to +55°
  • Weight: 4.4kg
  • Battery Selection: Gel, Sealed, Flooded
  • Enclosure: IP20
  • Terminals: 35mm²
  • Temperature Compensation: -5mV/°C/Cell @ 25°C (Adjustable)
  • Control Mode: MPPT Charging
  • Dimensions: 285mm x 203mm x 121mm

Features

  • MPPT function
  • LCD Display
  • 4 Stage Battery Charging, Bulk/Boost/Float & Equalise (No Equalise on
  • Gel Battery Setting)
  • Adjustable Charging Parameters
  • Ethernet Port (RJ45)
  • Serial RS-232 Port (DB9)
  • CAN Bus Port (Communicate with over CAN BUS devices)
  • Remote Temperature Sensor Port
  • Remote Battery Sense Port

Protections

  • PV Short Circuit
  • PV Over Current
  • PV Over Voltage
  • PV Polarity Reversed
  • Battery Polarity Reversed
  • Over Heating Protection



PRODUCT CODE: EMPPT60

£499.00


 
 
Add to cart View cart
ID: REG001 Dual Battery Controller 10A - 12V/24V

Our latest Dual-battery charging solar controller eliminates the added cost of two separate solar charging systems. The controller uses Pulse Width Modulation (PWM) the most effective means to achieve constant voltage battery charging, the result is a higher charging efficiency, rapid recharging and healthy batteries at full capacity.

The controller is ideal for use with motorhomes, caravans, boats or anywhere there are two independent batteries for instance a starter battery and a leisure battery.

The Charging percentages for each battery can be set manually if required. 

Features

  • Battery type selection: Sealed, Flooded or Gel
  • Two battery charging priority (from 0-100%)
  • Battery temperature sensor
  • Optional Remote meter (see options and related products below)
  • PWM charging, different frequency option.
  • Over charging, short-circuit, reverse polarity & reverse current to PV Protection

Intended use: 
For use with solar panels up to a maximum of 10A 



PRODUCT CODE: EDB10A 

£59.95


 
 
Add to cart View cart
ID: REG002 Dual Battery Controller 20A - 12V/24V

Our latest Dual-battery charging solar controller eliminates the added cost of two separate solar charging systems. The controller uses Pulse Width Modulation (PWM) the most effective means to achieve constant voltage battery charging, the result is a higher charging efficiency, rapid recharging and healthy batteries at full capacity.

The controller is ideal for use with motorhomes, caravans, boats or anywhere there are two independent batteries for instance a starter battery and a leisure battery.

The Charging percentages for each battery can be set manually if required. 

Features

  • Battery type selection: Sealed, Flooded or Gel
  • Two battery charging priority (from 0-100%)
  • Battery temperature sensor
  • Optional Remote meter (see options and related products below)
  • PWM charging, different frequency option
  • Over charging, short-circuit, reverse polarity & reverse current to PV Protection

Intended use: 
For use with solar panels up to a maximum of 20A 



PRODUCT CODE: EDB20A 

£69.95


 
 
Add to cart View cart
ID: REG003 Remote Meter for Dual Battery Controller

Remote meter with 5m of cable for use with: 

Dual Battery Controller 10A - 12V/24V

Dual Battery Controller 20A - 12V/24V 

LCD features

  • Time
  • Battery 1 - Voltage Max and Min
  • Battery 2 - Voltage Max and Min
  • PV - Voltage and AH
  • Remote Temperature



PRODUCT CODE: EMT001

£49.95


 
 
Add to cart View cart
ID: REG004 Solar Charge Controller 10A - 12/24V

The Sunshine Solar Controller features the latest PWM charge regulation for reliable and economical battery charge control. 

Features

  • Microcontroller digital accuracy
  • PWM charge mode & state of charge (SOC)
  • Fully automatic operation & electronic protections
  • Temperature compensation, external temperature sensor
  • Large terminals for up to 6mm² size wire

Electronic Protections

  • Short circuit & over current - solar & load
  • Reverse polarity - solar, load & battery
  • Reverse current at night
  • High voltage - load
  • Lightning - solar, load & battery

Humidity Protections

  • Circuit board-conformal coated
  • Terminals - corrosion protected

Dimensions:

  • 153mm x 76mm x 37mm

Intended use:

For use with solar panels up to a maximum of 10A



PRODUCT CODE: ERG10A

£34.95


 
 
Add to cart View cart
ID: REG005 Remote Meter for 10A Controller

Remote meter with 5m of cable for use with: 

Solar Charge Controller 10A - 12/24V 

LCD features

  • Battery 1 - Voltage Max and Min
  • PV - Voltage and AH
  • Remote Temperature

 


PRODUCT CODE: EMT002

 

£29.95


 
 
Add to cart View cart
ID: REG006 Sunshine 10A Marine Solar Controller 12/24V

The Sunshine Marine Controller is designed with the humid conditions associated with the marine environment in mind the fully encapsulated circuit board is completely moisture proof. Features also include the latest PWM charge regulation for reliable and economical battery charge control.

  • Rated Current: 10A
  • System Voltage: 12/24V Auto Set
  • Encapsulated Circuit board
  • Aluminum case
  • Moisture proof
  • Gel, Sealed and Flooded (battery type selection)
  • Load work mode: Manual ON/OFF

 


Features

 

  • Intelligent System Optimum Control
  • High efficient Series PWM charging with temperature compensation
  • Compact size
  • Uses MOSFET as an electronic switch, no mechanical switching
  • Digital LED menu, one button sets all
  • Load status display
  • Big terminals and big distances between terminals
  • Electronic protection: Overheating, over charging, over discharging, overload, and short circuit
  • Reverse polarity protection: Any combination of solar module and battery

Dimensions:

  • 132mm x 70mm x 30mm

Intended use:

For use with solar panels up to a maximum of 10A 

PRODUCT CODE: ES1024

£48.95


 
 
Add to cart View cart
ID: REG007 Sunshine Multi-function Charge Regulator 10AMP - 12V

This solar charge regulator is designed to control the charge from the solar panel into the battery and the power draw from the battery to the outputs.

The Sunshine Multi-function Charge Regulator combines full battery protection with seven outputs for charging various appliances with voltage ranges of 3V, 5V, 6V, 9V or 12V.

The robust compact design makes this unit ideal for camping and caravanning. 

Features

Electronic Protections

  • Over-discharge protection
  • Over-charge protection
  • Over-load protection
  • Built-in 10A fuse

Control Panel Features

  • Power Switch
  • Multiple Outputs
  • 12V Female Cigar Socket
  • 5V USB Adaptor
  • DC Voltage Adaptor outputs 3V, 6V & 9V
  • Two 12V DC jack sockets
  • Digital volt meter (with on/off switch)

Dimensions:

  • 145mm x 165mm x 70mm - 850g

Intended use

For use with solar panels up to a maximum of 150W @ 17.5V 

PRODUCT CODE: TMF10A

£39.95


 
 
Add to cart View cart
ID: REG008 Sunshine Charge Regulator 12V - 7AMP

This regulators S-S type connector is compatible with the following products:

  • Sunshine Solar Amorphous Battery Charger 15 Watt 12 Volt
  • Sunshine Solar Briefcase Charger 13 Watt & 28 Watt
  • Solar Powered Battery Optimiser
  • All Sunshine fastFIX Solar Panels
  • Sunshine Semi Flexible Solar Charger 5W & 10W

When the Sunshine Charge Regulator 12V - 7AMP is used with any of the above products setting up the system could not be easier. The plug and play connections make installation quick and easy, giving you piece of mind that your battery will not be overcharge when left. 

Specifications

  • Solar Input: 7A, 100W Max
  • Overcharge: 14V + 0.5V
  • Over Discharge: 10.5V + 0.5V
  • Dimensions: 70mm x 90mm x 20mm

Product Code: TRG07A 

£19.95


 
 
Add to cart View cart
ID: REG008A Solar Charge Controller with LCD 20A - 12/24V

Our second generation solar controller uses highly advanced technology providing longer battery life and improved system performance. Sets new standards for reliability and self-diagnostics. 

Features

  • Microprocessor made in the USA
  • PWM or ON/OFF series battery charging options
  • State of charge (SOC) battery regulation
  • Battery Ah setting, boost, equalising, float charging
  • Automatic load reconnection
  • Temperature compensation
  • LCD display: full system parameters
  • Full circuit protection, electronic fuse
  • Remote temperature sensor (optional)
  • Work mode options:ON/OFF, Dusk-to-Dawn, On + setting hours, Exact time ON/OFF

Specifications

  • Rated Charging Current: 20 amps
  • Rated Load Current: 20 amps
  • Over Heating Protection: 85°C, restarts at 80°C
  • Self Consumption: ≤44mA
  • System Voltage: 12/24V Auto-set
  • Working Temperature: -20°C to +55°C
  • Battery Type: Gel, Sealed, Flooded
  • Boost Charging: 14.2V 12V Working; 28.4V 24V Working;
  • Equalizing Charging: 14.6V 12V Working; 29.2V 24V Working; (Not Gel)
  • Float Charging: 13.8V 12V Working; 27.6V 24V Working;
  • Temperature: -3.5mV/°C /2v @ 25°C
  • Over Discharge Voltage: 11.1V 12V Working; 22.2V 24V Working;
  • Control Mode: PWM charging
  • Dimensions: 162mm x 100mm x 50mm

PRODUCT CODE: EVS20A 

£129.99


 
 
Add to cart View cart
ID: REG009 Solar Charge Controller with LCD 40A - 12/24V

Our second generation solar controller uses highly advanced technology providing longer battery life and improved system performance. Sets new standards for reliability and self-diagnostics. 

Features

  • Microprocessor made in the USA
  • PWM or ON/OFF series battery charging options
  • State of charge (SOC) battery regulation
  • Battery Ah setting, boost, equalising, float charging
  • Automatic load reconnection
  • Temperature compensation
  • LCD display: full system parameters
  • Full circuit protection, electronic fuse
  • Remote temperature sensor (optional)
  • Work mode options:ON/OFF, Dusk-to-Dawn, On + setting hours, Exact time ON/OFF

Specifications

  • Rated Charging Current: 40 amps
  • Rated Load Current: 40 amps
  • Over Heating Protection: 85°C, restarts at 80°C
  • Self Consumption: ≤44mA
  • System Voltage: 12/24V Auto-set
  • Working Temperature: -20°C to +55°C
  • Battery Type: Gel, Sealed, Flooded
  • Boost Charging: 14.2V 12V Working; 28.4V 24V Working;
  • Equalizing Charging: 14.6V 12V Working; 29.2V 24V Working; (Not Gel)
  • Float Charging: 13.8V 12V Working; 27.6V 24V Working;
  • Temperature: -3.5mV/°C /2v @ 25°C
  • Over Discharge Voltage: 11.1V 12V Working; 22.2V 24V Working;
  • Control Mode: PWM charging
  • Dimensions: 162mm x 100mm x 50mm

PRODUCT CODE: EVS40A 

£149.99


 
 
Add to cart View cart
ID: REG010 Solar Charge Controller with LCD 50A - 12/24V

Our second generation solar controller uses highly advanced technology providing longer battery life and improved system performance. Sets new standards for reliability and self-diagnostics. This Solar Charge Controller adopts the most advanced digital technique, displays information via the LCD display and is fully automatic. The Pulse Width Modulation (PWM) battery charging and unique control technology can graetly increase the lifetime of the battery/s. The controller is for off Grid systems and protects the battery from being overcharged by the Solar Panel/s and over discharged by the load. 

Features

  • Microprocessor made in the USA
  • PWM or ON/OFF series battery charging options
  • State of charge (SOC) battery regulation
  • Battery Ah setting, boost, equalising, float charging
  • Automatic load reconnection
  • Temperature compensation
  • LCD display: full system parameters
  • Full circuit protection, electronic fuse
  • Remote temperature sensor (optional)
  • Work mode options: ON/OFF, Dusk-to-Dawn, On + setting hours, Exact time ON/OFF

Specifications

  • Rated Charging Current: 50 amps
  • Rated Load Current: 50 amps
  • Over Heating Protection: 85°C, restarts at 80°C
  • Self Consumption: ≤44mA
  • System Voltage: 12/24V Auto-set
  • Working Temperature: -20°C to +55°C
  • Battery Type: Gel, Sealed, Flooded
  • Boost Charging: 14.2V 12V Working; 28.4V 24V Working;
  • Equalizing Charging: 14.6V 12V Working; 29.2V 24V Working; (Not Gel)
  • Float Charging: 13.8V 12V Working; 27.6V 24V Working;
  • Temperature: -3.5mV/°C /2v @ 25°C
  • Over Discharge Voltage: 11.1V 12V Working; 22.2V 24V Working;
  • Control Mode: PWM charging
  • Dimensions: 205mm x 119mm x 66mm

PRODUCT CODE: EVS50A 

£219.99


 
 
Add to cart View cart
ID: REG011 Solar Charge Controller with LCD 60A - 12/24V

Our second generation solar controller uses highly advanced technology providing longer battery life and improved system performance. Sets new standards for reliability and self-diagnostics. This Solar Charge Controller adopts the most advanced digital technique, displays information via the LCD display and is fully automatic. The Pulse Width Modulation (PWM) battery charging and unique control technology can greatly increase the lifetime of the battery/s. The controller is for off Grid systems and protects the battery from being overcharged by the Solar Panel/s and over discharged by the load. 

Features

  • Microprocessor made in the USA
  • PWM or ON/OFF series battery charging options
  • State of charge (SOC) battery regulation
  • Battery Ah setting, boost, equalising, float charging
  • Automatic load reconnection
  • Temperature compensation
  • LCD display: full system parameters
  • Full circuit protection, electronic fuse
  • Remote temperature sensor (optional)
  • Work mode options: ON/OFF, Dusk-to-Dawn, On + setting hours, Exact time ON/OFF

Specifications

  • Rated Charging Current: 60 amps
  • Rated Load Current: 60 amps
  • Over Heating Protection: 85°C, restarts at 80°C
  • Self Consumption: ≤44mA
  • System Voltage: 12/24V Auto-set
  • Working Temperature: -20°C to +55°C
  • Battery Type: Gel, Sealed, Flooded
  • Boost Charging: 14.2V 12V Working; 28.4V 24V Working;
  • Equalizing Charging: 14.6V 12V Working; 29.2V 24V Working; (Not Gel)
  • Float Charging: 13.8V 12V Working; 27.6V 24V Working;
  • Temperature: -3.5mV/°C /2v @ 25°C
  • Over Discharge Voltage: 11.1V 12V Working; 22.2V 24V Working;
  • Control Mode: PWM charging
  • Dimensions: 205mm x 119mm x 66mm

PRODUCT CODE: EVS60A 

£263.99


 
 
Add to cart View cart
ID: REG012 HRDi 12V/24V Solar & Wind Controller

Overcharge protection for the Rutland Windcharger & Solar PV Battery Charging Systems. 

Features

  • Protects batteries from overcharging
  • Protects electronic equipment from high voltage damage
  • Automatic 12 Volt or 24 Volt setting
  • Temperature compensation for optimum charging
  • Multi stage charging for optimum charge regime
  • Built in charge / stop switch for installation & maintenance
  • For use with Rutland 503, 504, 913, 914 & FM-910-3 Windchargers
  • Input for up to 160Watts of solar panels
  • For use with single or dual battery bank
  • Clear alpha-numeric digital LCD screen with user display options
  • Push button activated and timer controlled backlight
  • Accepts up to 6mm cable
  • Optional remote display can be added to dedicated port
  • Operating temperature:- 10°C to 40°C (LCD 0°C to + 40°C)

£153.95


 
 
Add to cart View cart
ID: REG013 Rutland HRSi 12V/24V Wind & Solar Regulator

Prevent battery overcharging with the HRSi Charge Regulator which is designed for use with the Rutland Windcharger models 504, 913 or FM910-3 plus up to 160W of solar panels. 

Features

  • Microcontroller based PWM battery overcharge regulation
  • Automatic voltage detection allows use with 12V or 24V systems
  • Tri-coloured LED's indicate charging status & battery voltage
  • Temperature compensation for optimal charging in all conditions
  • Additional input for up to 160 Watts of solar panels
  • Manual wind/solar shutdown switch reduces turbine speed to idle
  • Multi-stage charging programme
  • Built in blocking diode isolates regulator from other sources

£84.95


 
 
Add to cart View cart
ID: REG014 Rutland 504 - 12V Regulator

Prevent battery overcharging with this regulator which is designed for use with the Rutland 504 windcharger & up to 100W of solar. LED indicators display the battery and charging status.

£46.95


 
 
Add to cart View cart